Peel and stick wall murals are a popular choice for transforming rooms with ease. They offer a wide range of designs, are simple to install, and can be removed without damaging walls. But did you know that you can also reuse your peel and stick wall mural? With careful removal and storage, you can enjoy your favorite design in a new space or save money by reusing it later. In this article, we’ll guide you through the process of removing, storing, and reusing your peel and stick wall mural.
Benefits of Reusing Peel and Stick Wall Murals
- Cost-effective: Reusing your wall mural saves money on new decor.
- Eco-friendly: Reducing waste by reusing materials is good for the environment.
- Versatility: Easily update your space by moving the mural to a new room or home.
Preparing to Remove Your Wall Mural
Before you begin the removal process, gather the necessary tools and prepare your space:
- Hairdryer or heat gun (on low setting)
- Putty knife or flat tool for lifting edges
- Scissors for trimming
- Clean cloth for wiping the wall
- Original backing paper or wax paper for storage
Clear the area around the wall mural, removing any furniture or obstacles. This will give you plenty of space to work.
Removing the Peel and Stick Wall Mural
Follow these steps to carefully remove your wall mural without causing damage:
-
- Start at a top corner of the mural and gently lift the edge using a putty knife or your fingers. Be extra careful not to tear the mural, especially at the seams.
- Slowly peel the mural away from the wall at a 45-degree angle. If you encounter resistance, use a hairdryer on low heat to warm the adhesive, making it easier to remove. Hold the hairdryer a few inches from the mural and move it in a sweeping motion.
- Continue peeling the mural down the wall, working in small sections. Support the removed portion to prevent it from sticking back onto the wall. If the mural is large, consider having a partner assist you.
- Once the entire mural is removed, gently remove any remaining adhesive residue from the wall using a clean, damp cloth. Allow the wall to dry completely.
Cleaning and Storing Your Wall Mural
To ensure your wall mural remains in good condition for reuse, follow these cleaning and storage tips:
- Lay the removed mural flat on a clean surface, with the adhesive side facing up.
- Gently remove any dirt, dust, or debris from the adhesive using a soft brush or cloth. For stubborn residue, use a damp cloth and mild detergent, then allow the mural to air dry completely.
- Once clean and dry, carefully roll the mural with the design facing outwards, using the original backing paper or wax paper to prevent the adhesive from sticking together. Avoid creasing or folding the mural.
- Secure the rolled mural with rubber bands or tape, and place it in a sturdy tube or box for protection. Label the container for easy identification.
- Store the mural in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
Reapplying Your Stored Wall Mural
When you’re ready to reuse your stored wall mural, follow these steps for successful reapplication:
- Allow the mural and the wall to acclimate to room temperature before installation.
- Prepare the wall by cleaning it thoroughly and allowing it to dry completely. Ensure the surface is smooth, clean, and free of any debris or residue.
- If necessary, reactivate the adhesive on the back of th navigate to this site e mural by applying a thin layer of water or wallpaper paste. Allow it to dry until tacky.
- Carefully unroll the mural and apply it to the wall, starting at the top and working your way down. Use a wallpaper smoother or credit card to smooth out any air bubbles or wrinkles, working from the center outwards.
- Trim any excess mural at the edges using a sharp utility knife and straight edge.
Troubleshooting Common Issues
| Issue | Solution |
|---|---|
| Torn mural during removal | Carefully align torn edges and apply clear tape to the back of the mural to hold it together. |
| Adhesive residue on walls | Use a commercial adhesive remover or a mixture of warm water and mild dish soap to gently scrub the residue. |
| Wrinkles or bubbles after reapplication | Use a wallpaper smoother or credit card to gently push out air bubbles, starting from the center and moving outwards. For stubborn wrinkles, use a hairdryer on low heat to warm the area and smooth it out. |
Conclusion
Reusing your peel and stick wall mural is a cost-effective and eco-friendly way to refresh your space. By following the steps outlined in this guide, you can carefully remove, clean, store, and reapply your mural, allowing you to enjoy its beauty for years to come. Remember to take your time during the removal process, and store your mural properly to ensure its longevity. With a little patience and care, you’ll be able to transform your space with your favorite design again and again.
Hi there! My name is Ashton Pulsford and I’m an interior designer. I love making spaces look beautiful and feel cozy.
I started EasyWalls to share tips and ideas for decorating your home with wallpaper. Wallpaper is a fun way to add color and patterns to your walls. But it can be tricky to put up and take down. That’s where I come in!
